Tutorials
1-How to make a DIY Resin Bookmark?
Materials Needed:
Epoxy resin and hardener; Silicone bookmark molds; Dried flowers, glitter, or beads for decoration; Mixing cups and stirring sticks; and Protective gloves and mask.
Steps:
1. Prepare the Resin:
(i) Mix epoxy resin and hardener in the correct ratio (as per the resin kit instructions) in a disposable cup.
(ii) Stir gently for 2-3 minutes to avoid bubbles.
2. Decorate the Mold: Arrange dried flowers, glitter, or beads inside the silicone mold. Be creative with your designs!
3. Pour the Resin:
(i) Slowly pour the mixed resin into the mold, ensuring it covers the decorations evenly.
(ii) Tap the mold gently to release air bubbles.
4. Cure the Resin:
Let the resin cure for 24-48 hours (depending on the resin kit). Place it in a dust-free area.
5. Demold and Finish:
(i) Once cured, gently remove the bookmark from the mold.
(ii) Sand rough edges if needed, and attach a tassel or ribbon for a finished look.
Watch Tutorial
2-How to make DIY Faux Agate Coasters?
Materials Needed:
Air-dry clay or polymer clay, Acrylic paints (metallics work great for agate looks), Paintbrushes and sponge brushes, Gold leaf or metallic marker for edging, and Sealer or varnish.
Steps:
1. Shape the Coaster:
(i) Roll out air-dry clay to about 0.25-inch thickness.
(ii) Use a circular cutter or freehand a wavy, organic shape for a natural agate look.
2. Add Texture:
Use your fingers or tools to create uneven edges for a more realistic stone effect.
3. Paint the Base Layer:
Once the clay dries, paint the surface with a base color (e.g., white, black, or gray).
4. Create Agate Layers:
(i) Use thin brushstrokes to add wavy layers of colors. Start with darker shades and gradually build lighter layers.
(ii) Blend layers using a sponge brush for a soft gradient effect.
5. Add Metallic Details:
Outline the edges with gold leaf or a metallic marker. This gives a polished, realistic look.
6. Seal the Coasters:
Apply a sealer or varnish to protect the paint and add a glossy finish.
Watch Tutorial
3-How to make DIY Simple Sea Shell Earrings?
Materials Needed:
Small seashells, Earring hooks and jump rings, Jewelry pliers, Drill with a small bit (or nail and hammer for small holes), Optional: Paint, glitter, or clear sealant.
Steps:
1. Clean the Shells:
(i) Wash and dry the seashells thoroughly.
(ii) Paint or coat them with clear sealant if desired for a glossy finish.
2. Drill Holes: Carefully drill a small hole near the edge of each shell. Ensure the hole is big enough for a jump ring.
3. Attach Jump Rings: Open a jump ring with jewelry pliers and insert it through the hole in the shell.
4. Add Earring Hooks: Attach an earring hook to the jump ring and close the ring tightly with pliers.
5. Customize: Add additional embellishments like beads or charms if desired.
Watch Tutorial
4-How to make DIY Golden & Black Epoxy Resin Chess?
Materials Needed:
Epoxy resin and hardener, Black and gold pigments or mica powder, Silicone chess mold set (for board and pieces), Mixing cups and sticks, and Protective gloves and mask.
Steps:
1. Prepare the Resin: Mix resin and hardener as per the instructions in separate cups for black and gold colors.
2. Add Pigments: Mix black pigment into one cup and gold pigment into the other. Stir thoroughly to avoid clumps.
3. Pour the Resin:
(i) Carefully pour the black resin into molds for black pieces and alternate squares of the board.
(ii) Use gold resin for the gold pieces and remaining squares.
4. Remove Bubbles: Use a heat gun or blow torch briefly to pop surface bubbles.
5. Cure the Resin: Allow the resin to cure for 24-48 hours in a dust-free environment.
6. Demold and Assemble:
(i) Remove the chessboard and pieces from the molds.
(ii) Sand edges for a smoother finish if necessary.
7. Optional Finish: Apply a clear epoxy layer over the chessboard for a glossy finish.
Watch Tutorial